smash/ebk-unhb-co2ampel
2
1
Fork 0
forked from github/ebk_co2ampel
Code Issues 1 Pull requests Projects Releases 1 Wiki Activity

code cleanup

Browse source
This commit is contained in:
nilo 2020-10-31 12:02:27 +01:00
parent 6569a14ebf
commit 48cbcd7d34
1 changed files with 48 additions and 65 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

111
ebk_co2ampel/ebk_co2ampel.ino
View file

@ -1,89 +1,72 @@
#include <Arduino.h>
#include "MHZ19.h"
#include "SSD1306Wire.h"
#define RX_PIN 16
#define TX_PIN 17
#define BAUDRATE 9600
#include <Wire.h> // Only needed for Arduino 1.6.5 and earlier
#include "SSD1306Wire.h" // legacy include: `#include "SSD1306.h"`
#define RX_PIN 16 // Rx pin which the MHZ19 Tx pin is attached to
#define TX_PIN 17 // Tx pin which the MHZ19 Rx pin is attached to
#define BAUDRATE 9600 // Device to MH-Z19 Serial baudrate (should not be changed)
MHZ19 myMHZ19;
MHZ19 myMHZ19; // Constructor for library
HardwareSerial mySerial(1); // (ESP32 Example) create device to MH-Z19 serial
SSD1306Wire display(0x3c, 21, 22);
HardwareSerial mySerial(1);
SSD1306Wire display(0x3c, 21, 22);
unsigned long getDataTimer = 0;
int lastvals[120];
int dheight;
void setup()
{
Serial.begin(9600); // Device to serial monitor feedback
mySerial.begin(BAUDRATE, SERIAL_8N1, RX_PIN, TX_PIN); // (ESP32 Example) device to MH-Z19 serial start
myMHZ19.begin(mySerial); // *Serial(Stream) refence must be passed to library begin().
Serial.begin(9600);
mySerial.begin(BAUDRATE, SERIAL_8N1, RX_PIN, TX_PIN);
myMHZ19.begin(mySerial);
display.init();
// display.flipScreenVertically();
display.setContrast(255);
delay(1000);
display.clear();
dheight = display.getHeight();
myMHZ19.autoCalibration(); // Turn auto calibration ON (OFF autoCalibration(false))
myMHZ19.autoCalibration();
for (int x; x <= 119; x = x + 1) {
lastvals[x] = -1;
}
}
for (int x; x<=119; x=x+1) {
lastvals[x] = -1;
}
int calc_vpos_for_co2(int co2val, int display_height) {
return display_height - int((float(display_height) / 3000) * co2val);
}
void loop()
{
if (millis() - getDataTimer >= 2000)
{
int CO2;
/* note: getCO2() default is command "CO2 Unlimited". This returns the correct CO2 reading even
if below background CO2 levels or above range (useful to validate sensor). You can use the
usual documented command with getCO2(false) */
CO2 = myMHZ19.getCO2(); // Request CO2 (as ppm)
for (int x=1; x<=119; x=x+1) {
lastvals[x-1] = lastvals[x];
}
lastvals[119] = CO2;
display.clear();
for (int h=1; h<120; h=h+1) {
int curval = lastvals[h];
if (curval > 0) {
int vpos = display.getHeight() - int((float(display.getHeight()) / 3000) * lastvals[h]);
int vpos_1 = display.getHeight() - int((float(display.getHeight()) / 3000) * lastvals[h-1]);
display.drawLine(h-1, vpos_1, h, vpos);
}
}
int8_t Temp;
Temp = myMHZ19.getTemperature(); // Request Temperature (as Celsius)
display.setLogBuffer(5, 30);
display.println(CO2);
display.drawLogBuffer(0, 0);
display.display();
Serial.print("CO2 (ppm): ");
Serial.println(CO2);
Serial.println();
Serial.print("Temperature (C): ");
Serial.println(Temp);
getDataTimer = millis();
if (millis() - getDataTimer >= 5000)
{
int CO2;
CO2 = myMHZ19.getCO2();
for (int x = 1; x <= 119; x = x + 1) {
lastvals[x - 1] = lastvals[x];
}
lastvals[119] = CO2;
display.clear();
for (int h = 1; h < 120; h = h + 1) {
int curval = lastvals[h];
if (curval > 0) {
int vpos = calc_vpos_for_co2(lastvals[h], dheight);
int vpos_last = calc_vpos_for_co2(lastvals[h - 1], dheight);
display.drawLine(h - 1, vpos_last, h, vpos);
}
}
display.setLogBuffer(5, 30);
display.println(CO2);
display.drawLogBuffer(0, 0);
display.display();
Serial.print("CO2 (ppm): ");
Serial.println(CO2);
getDataTimer = millis();
}
}